How to choose the best furniture for your restaurant ?

First of all, when choosing furniture, you should first determine your own needs: the size of furniture has a great impact on the visual effect and use effect of the restaurant . Unless you are looking for customized furniture, you must accurately measure the size of the indoor placement place before buying, and then select suitable furniture, otherwise you will be easily tempted by selling furniture, Therefore, the selection of furniture starts from the specification of furniture.

Secondly, there are methods to identify high-grade furniture.When selecting restaurant furniture, pay special attention to the inspection quality, such as the high and low moisture content of wood, which is easy to warp and deform. The moisture content of furniture shall not exceed 12%. When ordinary consumers buy, without testing instruments, they can take the method of touching the bottom of furniture or the place without painting. If they feel damp, the moisture content shall be at least more than 50% and can't be used at all. Another way is to sprinkle a little water where the wood is not painted. If the bleeding is slow or not, it indicates that the moisture content is high. The selection of wood-based panel has deformation, edge expansion and concave convex in the middle, indicating that the water absorption of wood is too high. In terms of high cost performance, rubber wood is a good choice with moderate price and good material

The most important thing is whether the structure is firm. Small pieces of furniture, such as dining chairs, can be dragged on the cement floor and gently dropped. The sound is crisp, indicating that the quality is good; If the voice is dumb and there is a noise of splitting miles and trumpets, it indicates that the mortise is not tightly combined and the structure is not firm. The table can be shaken by hand to see if they are stable. The sofa can sit and shake hard. If it is inactive, soft and silent, it shows that the mortise structure is relatively firm. If you sit up and make a creak and shake, the nail is not firm and will not take long.Square tables, strip tables, chairs and other legs should have four triangular clips to fix them. If not, they may fall apart after a long time. When selecting, you can turn the tables and chairs upside down and have a look. The cloth covered chairs can be touched by hand.

Also, whether the four legs of dining table and chairs are flat and fall to the ground can be seen when they are put on the ground. Some furniture only has three legs to fall to the ground. Take a look to see if the desktop is straight, and you can't bow your back or collapse your waist. The tabletop is convex, and the glass plate will rotate when it is put on; The table is concave, and the glass plate will break when pressed.

RON GROUP,specialized in hospitality and catering products since 2005.

If you have any problems, please leave comments or contact with me , thank you for watching .